Skip to main content
Version: 5.0.0

Use InfluxDB as Time-Series Database

Preparation​

Starting with Kylin 5.0, the system uses RDBMS to store query history, which only use InfluxDB to record the monitoring information of the system.

If you need this information, you need to configure the time series database InfluxDB in advance to store data such as the monitoring information of the system.

We recommend you to use InfluxDB v1.6.4, which can download by the script $KYLIN_HOME/sbin/download-influxdb.sh.

The InfluxDB installation package, influxdb-1.6.4.x86_64.rpm will be under the influxdb directory in the installation directory of Kylin.

If you need to use the existed InfluxDB database in your environment, please use the versions below:

  • InfluxDB 1.6.4 or above

You can use the following command to check the version of InfluxDB in your current environment.

service influxdb version

Installation and Configuration for root User​

The following steps are using InfluxDB 1.6.4 as an example.

  1. Run command to check if InfluxDB is installed already.

    service influxdb status

    If not, you can download the influxdb and go to the directory where the InfluxDB installation package is located and install InfluxDB.

    # download influxDB
    $KYLIN_HOME/sbin/download-influxdb.sh

    # go to influxDB directory and install it
    cd $KYLIN_HOME/influxdb
    rpm -ivh influxdb-1.6.4.x86_64.rpm

  2. Launch InfluxDB.

    service influxdb start

    By default, you can find InfluxDB's log at /var/log/influxdb.

  3. If your InfluxDB server port is in use, you can modify the InfluxDB configuration file to change the server port.

    vi /etc/influxdb/influxdb.conf

    Please note the following three points:

    • Modify RPC port: The initial property is bind-address = "127.0.0.1:8088", you can change 8088 to an available port, for instance, 18087.
    • Modify HTTP port: The initial property is bind-address = ":8086", you can change 8086 to available port, for instance, 18086.
    • Set reporting-disabled = true, which means that the InfluxDB will not send reports to influxdata.com regularly.

  4. InfluxDB is accessible without a user name and password by default. If you want to strengthen the security level, you can set a password with the following steps:

  5. log in InfluxDB.

influx -port 18086

Tips: Please replace 18086 with an actually available port number.

  1. Manage admin user and password.

    CREATE USER admin WITH PASSWORD 'admin' WITH ALL PRIVILEGES

  2. Open the configuration file and modify [http] auth-enabled = true to enable authorization.

    vi /etc/influxdb/influxdb.conf

  3. Restart InfluxDB to take effect and login InfluxDB.

    service influxdb restart
    influx -port 18086 -username admin -password admin

  4. Open the property file kylin.properties and modify the InfluxDB configurations. Please replace ip:http_port, user, pwd, ip:rpc_port with real values.

 vi $KYLIN_HOME/conf/kylin.properties 
 
 ### Modify the following properties
 
 kylin.influxdb.address=ip:http_port
 kylin.influxdb.username=user
 kylin.influxdb.password=pwd
 kylin.metrics.influx-rpc-service-bind-address=ip:rpc_port

Note: If more than one Kylin instances are deployed, you should configure the above configurations in kylin.properties for each Kylin node and let them point to the same Influxdb instance.

  1. Encrypt influxdb password

    If you need to encrypt influxdb's password, you can do it like this：

    i. run following commands in ${KYLIN_HOME}, it will print encrypted password

    ./bin/kylin.sh org.apache.kylin.tool.general.CryptTool -e AES -s <password>

    ii. config kylin.influxdb.password like this

    kylin.influxdb.password=ENC('${encrypted_password}')

    iii. Here is an example, assuming influxdb's password is kylin

    First, we need to encrypt kylin using the following command

    ${KYLIN_HOME}/bin/kylin.sh org.apache.kylin.tool.general.CryptTool -e AES -s kylin
    AES encrypted password is:
    YeqVr9MakSFbgxEec9sBwg==

    Then, config kylin.metadata.url like this：

    kylin.influxdb.password=ENC('YeqVr9MakSFbgxEec9sBwg==')

  2. start Kylin.

Installation and Configuration for Non root User ​

The following steps are using InfluxDB 1.6.4 as an example.

  1. Suppose you install as user abc . Then create a directory home/abc/influx to copy the InfluxDB installation package, influxdb-1.6.4.x86_64.rpm ,from $KYLIN_HOME/influxdb to this directory after executing download influxDB script.

    # download influxDB
    $KYLIN_HOME/sbin/download-influxdb.sh

    mkdir /home/abc/influx
    cp $KYLIN_HOME/influxdb/influxdb-1.6.4.x86_64.rpm /home/abc/influx
    cd /home/abc/influx
    rpm2cpio influxdb-1.6.4.x86_64.rpm | cpio -idmv

  2. Edit the InfluxDB configuration file and replace /var/lib with /home/abc/influx globally. Also, you can modify bind-address property according to your case.

    vi /home/abc/influx/etc/influxdb/influxdb.conf

  3. Run following command to launch InfluxDB.

 nohup ./usr/bin/influxd run -config /home/abc/influx/etc/influxdb/influxdb.conf &

By default, you can find InfluxDB's log at /home/abc/influx/var/log/influxdb.

  1. As for other configurations, please refer to the second part in this section root User Installation And Configuration. Note that if you want to restart influxdb, you need to execute the following commands. Using service influxdb restart will not work since it requires root permission.

    ps -ef | grep influxdb
    kill {pid}

  2. Launch Kylin.

InfluxDB Connectivity​

To ensure the connectivity of InfluxDB service, it is recommended that you perform some tests after starting InfluxDB.

  • Log in to InfluxDB by entering the command line in the terminal: 
    /home/abc/influx/usr/bin/influx -port 18086 -username ${username} -password ${pwd}
    If the login fails, you can set auth-enabled = true in the configuration file influxdb.conf and try to login again.
  • After successful login , you can execute some simple queries to check if InfluxDB is configured correctly: 
    show databases;
    If the query fails and the message authorization failed is displayed, please confirm whether the user has sufficient permissions.

For more information about InfluxDB connectivity, please refer to the InfluxDB Maintenance section.

（optional）Configure HTTPS connection to InfluxDB ​

Before using HTTPS to connect to InfluxDB, you need to enable InfluxDB's HTTPS connection. To enable HTTPS for InfluxDB please refer to the official documentation: Enabling HTTPS with InfluxDB。

If the InfluxDB you are using has enabled HTTPS connection, please set the following parameters in the $KYLIN_HOME/conf/kylin.properties configuration file:

kylin.influxdb.https.enabled=true